INDEXABLE INSERTS
DNMG 车削刀片
对比 DNMG 个父型号 按材料与应用 之后再选择 a brand.
DNMG HADSTO, Achteck
DNMG 150404
DNMG 150404 indexable turning 刀片. 70 available options.
DNMG HADSTO, Achteck
DNMG 150408
DNMG 150408 indexable turning 刀片. 83 available options.
DNMG HADSTO, Achteck
DNMG 150412
DNMG 150412 indexable turning 刀片. 51 available options.
DNMG HADSTO, Achteck
DNMG 150604
DNMG 150604 indexable turning 刀片. 67 available options.
DNMG HADSTO, Achteck
DNMG 150608
DNMG 150608 indexable turning 刀片. 84 available options.
DNMG HADSTO, Achteck
DNMG 150612
DNMG 150612 indexable turning 刀片. 56 available options.
No matching 个父型号.
This is our DNMG range: 13 sizes, 464 variants, Achteck, HADSTO. The geometry is a 55° rhombic shape with four edges, which reaches contours and undercuts an 80° insert cannot. 应用 published for the family cover 钢, 不锈钢, 铸铁, 耐热合金.
Sizes in this family
Every DNMG size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| DNMG 150608 | 12.7 | 6.35 | 0.8 | 84 | P, M, K, S |
| DNMG 150408 | 12.7 | 4.76 | 0.8 | 83 | P, M, K, S |
| DNMG 150404 | 12.7 | 4.76 | 0.4 | 70 | P, M, K, S |
| DNMG 150604 | 12.7 | 6.35 | 0.4 | 67 | P, M, K, S |
| DNMG 150612 | 12.7 | 6.35 | 1.2 | 56 | P, M, K, S |
| DNMG 150412 | 12.7 | 4.76 | 1.2 | 51 | P, M, K, S |
| DNMG 110408 | 9.53 | 4.76 | 0.8 | 20 | P, M, K, S |
| DNMG 110404 | 9.53 | 4.76 | 0.4 | 17 | P, M, K, S |
| DNMG 150416 | 12.7 | 4.76 | 1.6 | 4 | P |
| DNMG 150616 | 12.7 | 6.35 | 1.6 | 4 | P |
| DNMG 150402 | 12.7 | 4.76 | 0.2 | 3 | P, K |
| DNMG 150602 | 12.7 | 6.35 | 0.2 | 3 | P, K |
| DNMG 110412 | 9.53 | 4.76 | 1.2 | 2 | P |
牌号s stocked in this family
AC152P, AC252P, AC052P, AT202, AT210A, AP200U, AC100M, AC200M, AP200M, AP301M, AC102K, AC202K, AP100S, AP010S, AC350P, HS7125, AC202P, HS8115 and others.
The family is published for 钢, 不锈钢, 铸铁, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
PC3, PD3, MC3, PA1, KC4, PC4, PB3, SC3, PD5, BM, GT, MT, PB1, SL3 and others. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
- 粗加工
- 中加工
- Semi-finish turning
- Finish turning
- Semi-finishing
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.