INDEXABLE INSERTS
SNMG 车削刀片
对比 SNMG 个父型号 按材料与应用 之后再选择 a brand.
SNMG HADSTO, Achteck
SNMG 120404
SNMG 120404 indexable turning 刀片. 57 available options.
SNMG HADSTO, Achteck
SNMG 120408
SNMG 120408 indexable turning 刀片. 76 available options.
SNMG HADSTO, Achteck
SNMG 120412
SNMG 120412 indexable turning 刀片. 58 available options.
No matching 个父型号.
SNMG is a square 90° shape giving eight cutting edges and the strongest edge of any common insert. There are 12 sizes in this family and 308 insert variants in stock, covering 钢, 不锈钢, 铸铁, 耐热合金.
Sizes in this family
Every SNMG size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| SNMG 120408 | 12.7 | 4.76 | 0.8 | 76 | P, M, K, S |
| SNMG 120412 | 12.7 | 4.76 | 1.2 | 58 | P, M, K, S |
| SNMG 120404 | 12.7 | 4.76 | 0.4 | 57 | P, M, K, S |
| SNMG 150616 | 15.88 | 6.35 | 1.6 | 28 | P, M, K, S |
| SNMG 150612 | 15.88 | 6.35 | 1.2 | 27 | P, M, K, S |
| SNMG 190612 | 19.05 | 6.35 | 1.2 | 23 | P, M, K, S |
| SNMG 190616 | 19.05 | 6.35 | 1.6 | 20 | P, M, K, S |
| SNMG 150608 | 15.88 | 6.35 | 0.8 | 7 | P, K |
| SNMG 190608 | 19.05 | 6.35 | 0.8 | 6 | P, K |
| SNMG 090304 | 9.53 | 3.18 | 0.4 | 2 | K |
| SNMG 090308 | 9.53 | 3.18 | 0.8 | 2 | K |
| SNMG 190624 | 19.05 | 6.35 | 2.4 | 2 | K |
牌号s stocked in this family
AC102K, AC202K, AC152P, AC252P, AC052P, AC350P, HS6120, AP200U, AP200M, AC100M, AC200M, AP100S, AP301M, AP010S, AT202, AT210A, HS7125, HS8115 and others.
The family is published for 钢, 不锈钢, 铸铁, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
KC4, MC3, MC4, PD5, PD3, SC3, PC4, MB2, PB1, PC3, SL3, UC4, BM, GT and others. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 粗加工
- 中加工
- 精加工
- Semi-finish turning
- Finish turning
- Semi-finishing
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.