SDMT 120408 铣削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- SDMT120408
- 刀片尺寸
- 120408
- Shape
- S — Square
- 刀尖圆角
- 0.8 mm
- 厚度
- 4.76 mm
- d / IC
- 12.7 mm
- Relief Angle
- 15°
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
SDMT 120408 is a square 90° milling insert with 8 usable cutting edges, used mainly for heavy roughing, square shoulders and interrupted cuts. We list 17 stock-keeping variants of it from Achteck, covering 钢, 不锈钢, 铸铁, 耐热合金.
铣削刀片 are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in SDMT 120408.
Geometry and dimensions
| Insert family | SDMT |
|---|---|
| Category | 铣削刀片 |
| Shape | square 90° (S) |
| Usable cutting edges | 8 |
| 内切圆直径 (IC) | 12.7 mm |
| 厚度 (S) | 4.76 mm |
| 刀尖圆角 (RE) | 0.8 mm |
| Cutting edge length (L) | 11.1 mm |
| Fixing hole diameter (D1) | 4.4–5.5 mm (typically 4.4 mm) |
| Hand | Neutral |
| Variants in stock | 17 |
| Brands | Achteck |
Cutting data
The 17 variants of SDMT 120408 listed here are supplied without a full published cutting-data set, so we do not publish one. Ask us for the specific grade and chipbreaker you are considering and we will send the manufacturer's window for it.
Carbide grades available
17 variants of SDMT 120408 are stocked in these grades: AP251K, AP251U, AP403M, AC251P, AC151K, AP351M, AC301K, AP351U.
Across this range the grades specified most often are AP251K, AP251U, AP403M, AC251P, AC151K. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
槽型 geometries
断屑槽 stocked for SDMT 120408: MM4, MR2.
For milling, the geometry code marks the intended duty — sharper for light cuts and better finish, stronger for scale and interruption. Milling insert selection guide.
Typical applications
- 面铣
- Chamfer milling
- 槽铣
- 斜坡铣
- 螺旋插补铣
- 插铣
- 型腔铣
For more on cutting steel, see our material-specific guide.