TNMG 160404 车削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- TNMG160404
- 刀片尺寸
- 160404
- Shape
- T — Triangle
- 刀尖圆角
- 0.4 mm
- 刀片长度
- 16.5 mm
- 厚度
- 4.76 mm
- 内切圆直径
- 9.525 mm
- 孔径
- 3.81 mm
- Relief Angle
- 0°
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
A triangular 60° turning insert with 6 cutting edges, TNMG 160404 is stocked here in 104 variants from Achteck, HADSTO. Published applications cover 钢, 不锈钢, 铸铁, 耐热合金. Key dimensions: 9.53 mm inscribed circle, 4.76 mm thickness, 0.4 mm nose radius.
The designation encodes the geometry: the first letter is the shape (T), the following letter the clearance angle, then the tolerance class, then size, thickness and nose radius. If you want to check any of it, our ISO insert code decoder breaks the full string down character by character.
Geometry and dimensions
| Insert family | TNMG |
|---|---|
| Category | 车削刀片 |
| Shape | triangular 60° (T) |
| Usable cutting edges | 6 |
| 内切圆直径 (IC) | 9.53 mm |
| 厚度 (S) | 4.76 mm |
| 刀尖圆角 (RE) | 0.4 mm |
| Fixing hole diameter (D1) | 3.81 mm |
| Hand | Neutral, Left, Right |
| Variants in stock | 104 |
| Brands | Achteck, HADSTO |
Recommended cutting data
The figures below are the manufacturers' published ranges, aggregated across the 104 variants listed on this page. The typical column is the median, which is where most shops end up running. Treat the full range as the envelope, not a target — start around 60–70% of it and work up.
| 工件材料 | Cutting speed vc (m/min) | Typical vc | Feed fn (mm/rev) | Depth of cut ap (mm) | Variants with data |
|---|---|---|---|---|---|
| 钢 (P) | 45 – 620 | 50 – 200 | 0.04–0.5 | 0.2–5 | 56 of 104 |
| 不锈钢 (M) | 70 – 250 | 85 – 200 | 0.05–0.8 | 0.2–8 | 21 of 104 |
| 铸铁 (K) | 50 – 490 | 50 – 200 | 0.04–0.8 | 0.2–8 | 20 of 104 |
| 耐热合金 (S) | 20 – 200 | 30 – 90 | 0.05–0.25 | 0.2–4.12 | 21 of 104 |
To turn a cutting speed into a spindle speed for your actual diameter, use the cutting parameters calculator: n = vc × 1000 / (π × D).
Carbide grades available
104 variants of TNMG 160404 are stocked in these grades: AT202, AT210A, AC152P, AC052P, AC252P, HS7125, AP200U, AP010S, AP200M, HS8115, HS8125, AC100M, AC200M, AP100S and others.
Across this range the grades specified most often are AT202, AT210A, AC152P, AC052P, AC252P. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
槽型 geometries
断屑槽 stocked for TNMG 160404: PL5, MB2, PC4, PB3, PB1, PD3, SC3, MC3, PA1, PC3, SL3, M1T, among others.
The chipbreaker sets the usable feed window far more than the depth of cut does. A roughing geometry run at finishing feed will not break the chip; a finishing geometry pushed into a roughing cut will chip. Match it to the feed you will actually run — chipbreaker selection guide.
Typical applications
- Semi-finish turning
- Semi-finishing
- Finish turning
- 中加工
- 粗加工
- 精加工
- Rough turning
For more on cutting steel, see our material-specific guide.
Choosing the right TNMG 160404
Three things decide which variant you need:
- The workpiece material group. This page lists variants published for 钢, 不锈钢, 铸铁, 耐热合金. Pick a grade from the group you are cutting — a steel grade on a superalloy will fail quickly.
- Feed, not depth of cut. The chipbreaker is defined by its feed window. Decide the feed first, then pick the geometry that covers it.
- 刀尖圆角 versus finish. TNMG 160404 is stocked here at 0.4 mm. A larger radius gives better finish at the same feed and a stronger edge, but raises cutting force.
Not sure whether TNMG 160404 is the right shape at all? The turning insert selection guide compares shapes by what the part profile allows.
Frequently asked questions about TNMG 160404
What size insert is TNMG 160404?
TNMG 160404 has an inscribed circle of 9.53 mm and a thickness of 4.76 mm. As a rule the depth of cut should stay under about two thirds of the inscribed circle.
What nose radius does TNMG 160404 have?
The nose radius (the last two digits of the designation) is 0.4 mm on the variants listed here. Surface roughness scales roughly with fn²/(32 × RE), so at a fixed feed a larger radius halves Ra.
Which holder does TNMG 160404 fit?
The holder designation must carry the same shape letter (T) and the same size digit. Send us your holder code and we will confirm the match before you order.
How many TNMG 160404 variants do you stock?
104 variants from Achteck, HADSTO, listed below with grade, chipbreaker and the published cutting data where the manufacturer provides it.
What cutting speed should I run for TNMG 160404?
For 钢, the published range across these variants is 45–620 m/min, with a typical window of 50–200 m/min. Heavy cuts sit at the bottom of that range, light finishing cuts at the top.
Related
- Same family: TNMG 160408, TNMG 160412, TNMG 220412, TNMG 220408, TNMG 220416, TNMG 160402, TNMG 110304, TNMG 160416
- All TNMG
- Achteck TNMG 160404 (85 variants)
- HADSTO TNMG 160404 (19 variants)
- Decode the TNMG 160404 designation
- Cutting speed to rpm calculator
- Turning insert selection guide