INDEXABLE INSERTS
TCMT 车削刀片
对比 TCMT 个父型号 按材料与应用 之后再选择 a brand.
TCMT HADSTO, Achteck
TCMT 090204
TCMT 090204 indexable turning 刀片. 40 available options.
TCMT HADSTO, Achteck
TCMT 110202
TCMT 110202 indexable turning 刀片. 15 available options.
TCMT HADSTO, Achteck
TCMT 110204
TCMT 110204 indexable turning 刀片. 46 available options.
TCMT HADSTO, Achteck
TCMT 110208
TCMT 110208 indexable turning 刀片. 43 available options.
TCMT HADSTO, Achteck
TCMT 16T304
TCMT 16T304 indexable turning 刀片. 43 available options.
TCMT HADSTO, Achteck
TCMT 16T308
TCMT 16T308 indexable turning 刀片. 41 available options.
No matching 个父型号.
TCMT is a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. There are 10 sizes in this family and 278 insert variants in stock, covering 钢, 不锈钢, 铸铁, 有色金属, 耐热合金.
Sizes in this family
Every TCMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| TCMT 110204 | 6.35 | 2.38 | 0.4 | 46 | P, M, K, N, S |
| TCMT 110208 | 6.35 | 2.38 | 0.8 | 43 | P, M, K, N, S |
| TCMT 16T304 | 9.53 | 3.97 | 0.4 | 43 | P, M, K, N, S |
| TCMT 16T308 | 9.53 | 3.97 | 0.8 | 41 | P, M, K, N, S |
| TCMT 090204 | 5.56 | 2.38 | 0.4 | 40 | P, M, K, N, S |
| TCMT 090208 | 5.56 | 2.38 | 0.8 | 25 | P, M, K, S |
| TCMT 16T312 | 9.53 | 3.97 | 1.2 | 20 | P, M, K, S |
| TCMT 110202 | 6.35 | 2.38 | 0.2 | 15 | P, M, K, N, S |
| TCMT 110302 | 6.35 | 3.18 | 0.2 | 4 | P |
| TCMT 090202 | 5.56 | 2.38 | 0.2 | 1 | P, M |
牌号s stocked in this family
AP200U, AT210A, AC052P, AC100M, AC152P, AC200M, AC252P, AP301M, AT202, AP200M, AC100K, AC102K, AC202K, AC350P, AP100S, HS6120, HS7125, HS7225 and others.
The family is published for 钢, 不锈钢, 铸铁, 有色金属, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
KC2, PC2, PB2, PB1, M2T, F1T, F2K. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 中加工
- 精加工
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.