INDEXABLE INSERTS
VNMA 车削刀片
对比 VNMA 个父型号 按材料与应用 之后再选择 a brand.
1可选型号查看 options
1可选型号查看 options
No matching 个父型号.
VNMA is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. There are 2 sizes in this family and 2 insert variants in stock, covering 铸铁.
Sizes in this family
Every VNMA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VNMA 160404 | 9.53 | 4.76 | 0.4 | 1 | K |
| VNMA 160408 | 9.53 | 4.76 | 0.8 | 1 | K |
牌号s stocked in this family
HS6120.
The family is published for 铸铁. Pick the grade from the group you are cutting — how to read grade names.
Typical operations
- 中加工
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。