SPKN 1504EDTR 铣削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- SPKN1504EDTR
- 刀片尺寸
- 1504EDTR
- Shape
- S — Square
- Relief Angle
- 11°
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
SPKN 1504EDTR — square 90° milling insert, 8 edges, 钢, 不锈钢, 铸铁. There are currently 2 variants in stock from HADSTO. Measured across the range: the standard dimensions of this designation.
铣削刀片 are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in SPKN 1504EDTR.
Geometry and dimensions
| Insert family | SPKN |
|---|---|
| Category | 铣削刀片 |
| Shape | square 90° (S) |
| Usable cutting edges | 8 |
| Variants in stock | 2 |
| Brands | HADSTO |
Recommended cutting data
The figures below are the manufacturers' published ranges, aggregated across the 2 variants listed on this page. The typical column is the median, which is where most shops end up running. Treat the full range as the envelope, not a target — start around 60–70% of it and work up.
| 工件材料 | Cutting speed vc (m/min) | Typical vc | Feed fn (mm/rev) | Depth of cut ap (mm) | Variants with data |
|---|
To turn a cutting speed into a spindle speed for your actual diameter, use the cutting parameters calculator: n = vc × 1000 / (π × D).
Carbide grades available
2 variants of SPKN 1504EDTR are stocked in these grades: HS5120, HS5130.
Across this range the grades specified most often are HS5120, HS5130. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
Typical applications
- 面铣
For more on cutting steel, see our material-specific guide.