INDEXABLE INSERTS
TDMT 铣削刀片
对比 TDMT 个父型号 按材料与应用 之后再选择 a brand.
9可选型号查看 options
5可选型号查看 options
5可选型号查看 options
1可选型号查看 options
1可选型号查看 options
1可选型号查看 options
1可选型号查看 options
No matching 个父型号.
This is our TDMT range: 7 sizes, 23 variants, Achteck. The geometry is a dedicated geometry for its intended operation. 应用 published for the family cover 钢, 不锈钢, 铸铁, 耐热合金.
Sizes in this family
Every TDMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| TDMT 150508 | 11.4 | 5.56–5.6 | 0.8 | 9 | P, M, K, S |
| TDMT 150512 | 11.4 | 5.6 | 1.2 | 5 | P, M, K, S |
| TDMT 150516 | 11.4 | 5.6 | 1.6 | 5 | P, M, K, S |
| TDMT 150520 | 11.4 | 5.6 | 2 | 1 | P, M, S |
| TDMT 150524 | 11.4 | 5.6 | 2.4 | 1 | P, M, S |
| TDMT 150531 | 11.4 | 5.56 | 3.1 | 1 | P, M, S |
| TDMT 150540 | 11.4 | 5.56 | 4 | 1 | P, M, S |
牌号s stocked in this family
AP403M, AP251U, AP351M, AC301K, AP251K, AC251P.
The family is published for 钢, 不锈钢, 铸铁, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
MM4, MM3. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 方肩铣
- 面铣
- 槽铣
- 斜坡铣
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。