INDEXABLE INSERTS
CCMW 车削刀片
对比 CCMW 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
CCMW is an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. There are 6 sizes in this family and 16 insert variants in stock, covering 铸铁.
Sizes in this family
Every CCMW size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| CCMW 060204 | 6.35 | 2.38 | 0.4 | 3 | K |
| CCMW 09T304 | 9.53 | 3.97 | 0.4 | 3 | K |
| CCMW 09T308 | 9.53 | 3.97 | 0.8 | 3 | K |
| CCMW 120404 | 12.7 | 4.76 | 0.4 | 3 | K |
| CCMW 120408 | 12.7 | 4.76 | 0.8 | 2 | K |
| CCMW 120412 | 12.7 | 4.76 | 1.2 | 2 | K |
牌号s stocked in this family
AC102K, AC202K, AC100K.
The family is published for 铸铁. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
KD5. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。