TCET 车削刀片

This is our TCET range: 9 sizes, 34 variants, Achteck. The geometry is a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. 应用 published for the family cover 钢.

Sizes in this family

Every TCET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.

牌号s stocked in this family

AT210A, AT210.

The family is published for 钢. Pick the grade from the group you are cutting — how to read grade names.

槽型 geometries

M, F. The chipbreaker defines the feed window — chipbreaker selection guide.

Typical operations

• 精加工

Which size do you need?

• 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
• 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
• Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.

Related

• All 车削刀片
• Turning insert selection guide
• Decode the designation
• Cutting speed / feed calculator