INDEXABLE INSERTS
VCET 车削刀片
对比 VCET 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
VCET is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. There are 3 sizes in this family and 8 insert variants in stock, covering 钢, 不锈钢.
Sizes in this family
Every VCET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VCET 110301 | 6.35 | 3.18 | 0.1 | 3 | P, M |
| VCET 110302 | 6.35 | 3.18 | 0.2 | 3 | P, M |
| VCET 110304 | 6.35 | 3.18 | 0.4 | 2 | P |
牌号s stocked in this family
AT210A, AP100U.
The family is published for 钢, 不锈钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
F. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。