INDEXABLE INSERTS
VNGA 车削刀片
对比 VNGA 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
This is our VNGA range: 4 sizes, 12 variants, Achteck. The geometry is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. 应用 published for the family cover 铸铁, 有色金属, 淬硬钢.
Sizes in this family
Every VNGA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VNGA 160404 | 9.53 | 4.76 | 0.4 | 4 | K, N, H |
| VNGA 160408 | 9.53 | 4.76 | 0.8 | 4 | K, N, H |
| VNGA 160412 | 9.53 | 4.76 | 1.2 | 3 | K, H |
| VNGA 160402 | 9.53 | 4.76 | 0.2 | 1 | N |
牌号s stocked in this family
PD20, PB30, PB60, PB90.
The family is published for 铸铁, 有色金属, 淬硬钢. Pick the grade from the group you are cutting — how to read grade names.
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。