INDEXABLE INSERTS
AOMT 铣削刀片
对比 AOMT 个父型号 按材料与应用 之后再选择 a brand.
4可选型号查看 options
4可选型号查看 options
6可选型号查看 options
4可选型号查看 options
1可选型号查看 options
5可选型号查看 options
13可选型号查看 options
5可选型号查看 options
3可选型号查看 options
6可选型号查看 options
4可选型号查看 options
6可选型号查看 options
3可选型号查看 options
No matching 个父型号.
AOMT is a parallelogram milling geometry, typically used on 85° and 90° shoulder cutters. There are 13 sizes in this family and 64 insert variants in stock, covering 钢, 不锈钢, 铸铁, 耐热合金, 淬硬钢.
Sizes in this family
Every AOMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| AOMT 120408 | 8.15 | 5.07 | 0.8 | 13 | P, M, K, S |
| AOMT 10T308 | 6.85 | 3.83 | 0.8 | 6 | P, M, K, S, H |
| AOMT 120420 | 8.15 | 5.07 | 2 | 6 | P, M, S |
| AOMT 120431 | 8.15 | 5.07 | 3.1 | 6 | P, M, S |
| AOMT 120404 | 8.15 | 5.07 | 0.4 | 5 | P, M, K, S |
| AOMT 120412 | 8.15 | 5.07 | 1.2 | 5 | P, M, S |
| AOMT 060204 | 4.1 | 2.45 | 0.4 | 4 | P, M, S |
| AOMT 060208 | 4.1 | 2.45 | 0.8 | 4 | P, M, S |
| AOMT 10T316 | 6.85 | 3.83 | 1.6 | 4 | P, M, S |
| AOMT 120424 | 8.15 | 5.07 | 2.4 | 4 | P, M, S |
| AOMT 120416 | 8.15 | 5.07 | 1.6 | 3 | P, M, S |
| AOMT 120440 | 8.15 | 5.07 | 4 | 3 | P, M, S |
| AOMT 10T331 | 6.85 | 3.83 | 3.1 | 1 | M, S |
牌号s stocked in this family
AP403S, AP351M, AP403M, AP251U, AC451S, AP351S, AP251K, AP351U, AP151H, AP153H.
The family is published for 钢, 不锈钢, 铸铁, 耐热合金, 淬硬钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
MM4, MM3. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 方肩铣
- 面铣
- 槽铣
- 斜坡铣
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。