LNET 1005 铣削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- LNET1005
- 刀片尺寸
- 1005
- Shape
- L
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
This page covers every LNET 1005 insert we can supply — 1 variants across Achteck, published for 铸铁, 淬硬钢. The rectangular 90° geometry gives it 2 cutting edges and makes it suitable for grooving, parting and shoulder work.
铣削刀片 are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in LNET 1005.
Geometry and dimensions
| Insert family | LNET |
|---|---|
| Category | 铣削刀片 |
| Shape | rectangular 90° (L) |
| Usable cutting edges | 2 |
| 内切圆直径 (IC) | 5.2 mm |
| 厚度 (S) | 10 mm |
| 刀尖圆角 (RE) | 1.2 mm |
| Cutting edge length (L) | 9.5 mm |
| Fixing hole diameter (D1) | 3.4 mm |
| Hand | Neutral |
| Variants in stock | 1 |
| Brands | Achteck |
Carbide grades available
1 variants of LNET 1005 are stocked in these grades: AP151H.
Across this range the grades specified most often are AP151H. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
槽型 geometries
断屑槽 stocked for LNET 1005: MM4.
For milling, the geometry code marks the intended duty — sharper for light cuts and better finish, stronger for scale and interruption. Milling insert selection guide.
Typical applications
- 方肩铣
- 面铣
For more on cutting cast iron, see our material-specific guide.