ONHU 050408 铣削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- ONHU050408
- 刀片尺寸
- 050408
- Shape
- O
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
This page covers every ONHU 050408 insert we can supply — 1 variants across Achteck, published for 钢, 不锈钢. The 135° octagonal geometry gives it 8 cutting edges and makes it suitable for multi-edge general machining.
铣削刀片 are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in ONHU 050408.
Geometry and dimensions
| Insert family | ONHU |
|---|---|
| Category | 铣削刀片 |
| Shape | 135° octagonal (O) |
| Usable cutting edges | 8 |
| 内切圆直径 (IC) | 12.7 mm |
| 厚度 (S) | 4.76 mm |
| 刀尖圆角 (RE) | 0.8 mm |
| Cutting edge length (L) | 4.9 mm |
| Fixing hole diameter (D1) | 4.4 mm |
| Hand | Neutral |
| Variants in stock | 1 |
| Brands | Achteck |
Carbide grades available
1 variants of ONHU 050408 are stocked in these grades: AP251U.
Across this range the grades specified most often are AP251U. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
槽型 geometries
断屑槽 stocked for ONHU 050408: MM3.
For milling, the geometry code marks the intended duty — sharper for light cuts and better finish, stronger for scale and interruption. Milling insert selection guide.
Typical applications
- 面铣
For more on cutting steel, see our material-specific guide.