SDMT 120430 铣削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- SDMT120430
- 刀片尺寸
- 120430
- Shape
- S
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
SDMT 120430 is a square 90° milling insert with 8 usable cutting edges, used mainly for heavy roughing, square shoulders and interrupted cuts. We list 1 stock-keeping variants of it from Achteck, covering 铸铁.
铣削刀片 are chosen to match the cutter body — lead angle, number of teeth and the geometry designated by the manufacturer. The milling insert selection guide walks through that; this page lists what we actually hold in SDMT 120430.
Geometry and dimensions
| Insert family | SDMT |
|---|---|
| Category | 铣削刀片 |
| Shape | square 90° (S) |
| Usable cutting edges | 8 |
| 内切圆直径 (IC) | 12.7 mm |
| 厚度 (S) | 4.76 mm |
| 刀尖圆角 (RE) | 3 mm |
| Cutting edge length (L) | 6.7 mm |
| Fixing hole diameter (D1) | 4.4 mm |
| Hand | Neutral |
| Variants in stock | 1 |
| Brands | Achteck |
Carbide grades available
1 variants of SDMT 120430 are stocked in these grades: AP251K.
Across this range the grades specified most often are AP251K. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
槽型 geometries
断屑槽 stocked for SDMT 120430: MM4.
For milling, the geometry code marks the intended duty — sharper for light cuts and better finish, stronger for scale and interruption. Milling insert selection guide.
Typical applications
- 面铣
- Chamfer Milling
- 槽铣
- 斜坡铣
- Helical Interpolation
- 插铣
- 型腔铣
For more on cutting cast iron, see our material-specific guide.