INDEXABLE INSERTS
SEKT 铣削刀片
对比 SEKT 个父型号 按材料与应用 之后再选择 a brand.
1可选型号查看 options
No matching 个父型号.
SEKT is a square milling geometry, used on face mills and shoulder cutters. There are 1 sizes in this family and 1 insert variants in stock, covering 钢, 不锈钢, 耐热合金.
Sizes in this family
Every SEKT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| SEKT 1204 | 12.7 | 4.76 | 1.2 | 1 | P, M, S |
牌号s stocked in this family
AP351U.
The family is published for 钢, 不锈钢, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
MR2. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 面铣
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。