INDEXABLE INSERTS
CCGT 车削刀片
对比 CCGT 个父型号 按材料与应用 之后再选择 a brand.
3可选型号查看 options
2可选型号查看 options
3可选型号查看 options
3可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
No matching 个父型号.
CCGT covers 7 insert sizes in an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. We stock 17 variants across the family from Achteck, published for 钢, 不锈钢.
Sizes in this family
Every CCGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| CCGT 060201 | 6.35 | 2.38 | 0.1 | 3 | P, M |
| CCGT 060204 | 6.35 | 2.38 | 0.2–0.4 | 3 | P, M |
| CCGT 09T301 | 9.53 | 3.97 | 0.1 | 3 | P, M |
| CCGT 060202 | 6.35 | 2.38 | 0.2 | 2 | P |
| CCGT 09T302 | 9.53 | 3.97 | 0.2 | 2 | P |
| CCGT 09T304 | 9.53 | 3.97 | 0.4 | 2 | P |
| CCGT 09T308 | 9.53 | 3.97 | 0.8 | 2 | P |
牌号s stocked in this family
AT210A, AP100U, AP301M.
The family is published for 钢, 不锈钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
UF, UM. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
- 中加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。