CCGW 09T302 车削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- CCGW09T302
- 刀片尺寸
- 09T302
- Shape
- C
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
CCGW 09T302 — 80° rhombic turning insert, 4 edges, 铸铁, 有色金属, 淬硬钢. There are currently 5 variants in stock from Achteck. Measured across the range: 9.52–9.53 mm (typically 9.52 mm) inscribed circle, 3.97 mm thickness, 0.2 mm nose radius.
The designation encodes the geometry: the first letter is the shape (C), the following letter the clearance angle, then the tolerance class, then size, thickness and nose radius. If you want to check any of it, our ISO insert code decoder breaks the full string down character by character.
Geometry and dimensions
| Insert family | CCGW |
|---|---|
| Category | 车削刀片 |
| Shape | 80° rhombic (C) |
| Usable cutting edges | 4 |
| 内切圆直径 (IC) | 9.52–9.53 mm (typically 9.52 mm) |
| 厚度 (S) | 3.97 mm |
| 刀尖圆角 (RE) | 0.2 mm |
| Fixing hole diameter (D1) | 4.4 mm |
| Hand | Neutral |
| Variants in stock | 5 |
| Brands | Achteck |
Recommended cutting data
The figures below are the manufacturers' published ranges, aggregated across the 5 variants listed on this page. The typical column is the median, which is where most shops end up running. Treat the full range as the envelope, not a target — start around 60–70% of it and work up.
| 工件材料 | Cutting speed vc (m/min) | Typical vc | Feed fn (mm/rev) | Depth of cut ap (mm) | Variants with data |
|---|---|---|---|---|---|
| 铸铁 (K) | 150 – 450 | 150 – 450 | 0.03–0.3 | — | 1 of 5 |
| 有色金属 (N) | 300 – 600 | 300 – 600 | 0.03–0.3 | — | 2 of 5 |
| 淬硬钢 (H) | 90 – 180 | 105 – 155 | 0.03–0.3 | — | 2 of 5 |
To turn a cutting speed into a spindle speed for your actual diameter, use the cutting parameters calculator: n = vc × 1000 / (π × D).
Carbide grades available
5 variants of CCGW 09T302 are stocked in these grades: PD20, PB30, PB60, PB90.
Across this range the grades specified most often are PD20, PB30, PB60, PB90. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.