INDEXABLE INSERTS
CCMT 车削刀片
对比 CCMT 个父型号 按材料与应用 之后再选择 a brand.
CCMT HADSTO, Achteck
CCMT 060202
CCMT 060202 indexable turning 刀片. 25 available options.
CCMT HADSTO, Achteck
CCMT 060204
CCMT 060204 indexable turning 刀片. 49 available options.
CCMT HADSTO, Achteck
CCMT 060208
CCMT 060208 indexable turning 刀片. 41 available options.
CCMT HADSTO, Achteck
CCMT 09T304
CCMT 09T304 indexable turning 刀片. 50 available options.
CCMT HADSTO, Achteck
CCMT 09T308
CCMT 09T308 indexable turning 刀片. 52 available options.
CCMT HADSTO, Achteck
CCMT 120404
CCMT 120404 indexable turning 刀片. 31 available options.
CCMT HADSTO, Achteck
CCMT 120408
CCMT 120408 indexable turning 刀片. 32 available options.
No matching 个父型号.
This is our CCMT range: 10 sizes, 324 variants, Achteck, HADSTO. The geometry is an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. 应用 published for the family cover 钢, 不锈钢, 铸铁, 有色金属, 耐热合金.
Sizes in this family
Every CCMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| CCMT 09T308 | 9.53 | 3.97 | 0.8 | 52 | P, M, K, N, S |
| CCMT 09T304 | 9.53 | 3.97 | 0.4 | 50 | P, M, K, N, S |
| CCMT 060204 | 6.35 | 2.38 | 0.4 | 49 | P, M, K, N, S |
| CCMT 060208 | 6.35 | 2.38 | 0.8 | 41 | P, M, K, N, S |
| CCMT 120408 | 12.7 | 4.76 | 0.8 | 32 | P, M, K, N, S |
| CCMT 120404 | 12.7 | 4.76 | 0.4 | 31 | P, M, K, N, S |
| CCMT 060202 | 6.35 | 2.38 | 0.2 | 25 | P, M, K, N, S |
| CCMT 120412 | 12.7 | 4.76 | 1.2 | 23 | P, M, K, S |
| CCMT 09T302 | 9.53 | 3.97 | 0.2 | 13 | P, M, K, S |
| CCMT 09T312 | 9.53 | 3.97 | 1.2 | 8 | P, M, S |
牌号s stocked in this family
AP200U, AC052P, AC152P, AC100M, AC200M, AC252P, AP301M, AP200M, AT202, AT210A, AP100S, HS6120, HS7125, HS7225, HS8115, HS8125, AC102K, AC202K and others.
The family is published for 钢, 不锈钢, 铸铁, 有色金属, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
PC2, PB2, KC2, PB1, F2K, F1T, M2T, PA1, M2Y. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 中加工
- 精加工
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.