INDEXABLE INSERTS
RCMX 车削刀片
对比 RCMX 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
RCMX is a round shape with no corner — the strongest edge available, used for roughing, hard skins and long-reach work. There are 6 sizes in this family and 25 insert variants in stock, covering 钢.
Sizes in this family
Every RCMX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| RCMX 320900 | 9.53 | 32 | 16 | 5 | P |
| RCMX 100300 | 3.18 | 10 | 5 | 4 | P |
| RCMX 120400 | 4.76 | 12 | 6 | 4 | P |
| RCMX 160600 | 6.35 | 16 | 8 | 4 | P |
| RCMX 200600 | 6.35 | 20 | 10 | 4 | P |
| RCMX 250700 | 7.94 | 25.7 | 12.5 | 4 | P |
牌号s stocked in this family
AC052P, AC152P, AC252P, AC350P, AC202P.
The family is published for 钢. Pick the grade from the group you are cutting — how to read grade names.
Typical operations
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。