INDEXABLE INSERTS
TCGT 车削刀片
对比 TCGT 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
TCGT is a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. There are 4 sizes in this family and 8 insert variants in stock, covering 钢.
Sizes in this family
Every TCGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| TCGT 110201 | 6.35 | 2.38 | 0.1 | 2 | P |
| TCGT 110202 | 6.35 | 2.38 | 0.2 | 2 | P |
| TCGT 110204 | 6.35 | 2.38 | 0.4 | 2 | P |
| TCGT 16T304 | 9.53 | 3.97 | 0.4 | 2 | P |
牌号s stocked in this family
AT210A.
The family is published for 钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
UF. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。