INDEXABLE INSERTS
TPEH 车削刀片
对比 TPEH 个父型号 按材料与应用 之后再选择 a brand.
2可选型号查看 options
4可选型号查看 options
4可选型号查看 options
2可选型号查看 options
4可选型号查看 options
4可选型号查看 options
4可选型号查看 options
4可选型号查看 options
4可选型号查看 options
No matching 个父型号.
This is our TPEH range: 9 sizes, 32 variants, Achteck. The geometry is a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. 应用 published for the family cover 钢.
Sizes in this family
Every TPEH size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| TPEH 080202 | 4.76 | 2.38 | 0.2 | 4 | P |
| TPEH 080204 | 4.76 | 2.38 | 0.4 | 4 | P |
| TPEH 090202 | 5.56 | 2.38 | 0.2 | 4 | P |
| TPEH 090204 | 5.56 | 2.38 | 0.4 | 4 | P |
| TPEH 110302 | 6.35 | 3.18 | 0.2 | 4 | P |
| TPEH 110304 | 6.35 | 3.18 | 0.4 | 4 | P |
| TPEH 110308 | 6.35 | 3.18 | 0.8 | 4 | P |
| TPEH 080201 | 4.76 | 2.38 | 0.1 | 2 | P |
| TPEH 090201 | 5.56 | 2.38 | 0.1 | 2 | P |
牌号s stocked in this family
AT210A, AT210.
The family is published for 钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
F. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。