INDEXABLE INSERTS
VBET 车削刀片
对比 VBET 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
VBET is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. There are 6 sizes in this family and 41 insert variants in stock, covering 钢, 不锈钢.
Sizes in this family
Every VBET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VBET 110302 | 6.35 | 3.18 | 0.2 | 13 | P, M |
| VBET 110301 | 6.35 | 3.18 | 0.1 | 9 | P, M |
| VBET 110304 | 6.35 | 3.18 | 0.4 | 6 | P |
| VBET 160402 | 9.52 | 4.76 | 0.2 | 5 | P, M |
| VBET 160404 | 9.52 | 4.76 | 0.4 | 4 | P |
| VBET 160408 | 9.52 | 4.76 | 0.8 | 4 | P |
牌号s stocked in this family
AT210A, AT210, AP100U.
The family is published for 钢, 不锈钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
Y, M, F. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。