INDEXABLE INSERTS
VBMT 车削刀片
对比 VBMT 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
VBMT covers 11 insert sizes in a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. We stock 231 variants across the family from Achteck, HADSTO, published for 钢, 不锈钢, 铸铁, 有色金属, 耐热合金.
Sizes in this family
Every VBMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VBMT 160408 | 9.52 | 4.76 | 0.8 | 53 | P, M, K, S |
| VBMT 160404 | 9.52 | 4.76 | 0.4 | 50 | P, M, K, S |
| VBMT 110304 | 6.35 | 3.18 | 0.4 | 29 | P, M, K, S |
| VBMT 160412 | 9.52 | 4.76 | 1.2 | 27 | P, M, K, S |
| VBMT 110308 | 6.35 | 3.18 | 0.8 | 26 | P, M, K, S |
| VBMT 160402 | 9.52 | 4.76 | 0.2 | 14 | P, M, K, S |
| VBMT 110302 | 6.35 | 3.18 | 0.2 | 12 | P, M, K |
| VBMT 110304-MV | 6.35 | 3.18 | 0.4 | 5 | P, M, K, N |
| VBMT 110308-MV | 6.35 | 3.18 | 0.8 | 5 | P, M, K, N |
| VBMT 160404-MV | 9.53 | 4.76 | 0.4 | 5 | P, M, K, N |
| VBMT 160408-MV | 9.53 | 4.76 | 0.8 | 5 | P, M, K, N |
牌号s stocked in this family
AC052P, AC152P, AT202, AT210A, AC252P, AP200U, AC100M, AC200M, AP301M, AP200M, AP100S, AP010S, HS6120, HS7125, HS7225, HS8115, HS8125, AC102K and others.
The family is published for 钢, 不锈钢, 铸铁, 有色金属, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
BS, PB1, PC2, PB2, MV, KC2, PA1, F2K. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
- 中加工
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.