VCMT 160408-MV 车削刀片
对比 合适的材料与应用, ，然后选择 a brand 查看 the exact SKUs.
- ISO Code
- VCMT160408-MV
- 刀片尺寸
- 160408-MV
- Shape
- V — Diamond 35°
- 刀尖圆角
- 0.8 mm
- 刀片长度
- 16.5 mm
- 厚度
- 4.76 mm
- 内切圆直径
- 9.525 mm
- 孔径
- 4.4 mm
- Relief Angle
- 7°
查找合适的选项
Select the workpiece material and application. 品牌 remains optional.
Brands
该父型号的全部可选规格。
This page covers every VCMT 160408-MV insert we can supply — 5 variants across HADSTO, published for 钢, 不锈钢, 铸铁, 有色金属. The 35° rhombic geometry gives it 4 cutting edges and makes it suitable for fine profiling, copying and sharp internal corners.
The designation encodes the geometry: the first letter is the shape (V), the following letter the clearance angle, then the tolerance class, then size, thickness and nose radius. If you want to check any of it, our ISO insert code decoder breaks the full string down character by character.
Geometry and dimensions
| Insert family | VCMT |
|---|---|
| Category | 车削刀片 |
| Shape | 35° rhombic (V) |
| Usable cutting edges | 4 |
| 内切圆直径 (IC) | 9.53 mm |
| 厚度 (S) | 4.76 mm |
| 刀尖圆角 (RE) | 0.8 mm |
| Fixing hole diameter (D1) | 4.4 mm |
| Variants in stock | 5 |
| Brands | HADSTO |
Cutting data
The 5 variants of VCMT 160408-MV listed here are supplied without a full published cutting-data set, so we do not publish one. Ask us for the specific grade and chipbreaker you are considering and we will send the manufacturer's window for it.
Carbide grades available
5 variants of VCMT 160408-MV are stocked in these grades: HS6120, HS7125, HS7225, HS8115, HS8125.
Across this range the grades specified most often are HS6120, HS7125, HS7225, HS8115, HS8125. Within one brand's range, a higher middle digit usually means a tougher grade — better on interrupted cuts, slightly less wear resistant. See carbide grades explained for how to read the names.
槽型 geometries
断屑槽 stocked for VCMT 160408-MV: MV.
The chipbreaker sets the usable feed window far more than the depth of cut does. A roughing geometry run at finishing feed will not break the chip; a finishing geometry pushed into a roughing cut will chip. Match it to the feed you will actually run — chipbreaker selection guide.
Typical applications
- 精加工
- 中加工
- 粗加工
For more on cutting steel, see our material-specific guide.