INDEXABLE INSERTS
VPET 车削刀片
对比 VPET 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
VPET is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. There are 5 sizes in this family and 14 insert variants in stock, covering 钢.
Sizes in this family
Every VPET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VPET 080201 | 4.76 | 2.38 | 0.1 | 4 | P |
| VPET 080202 | 4.76 | 2.38 | 0.2 | 4 | P |
| VPET 110301 | 6.35 | 3.18 | 0.1 | 2 | P |
| VPET 110302 | 6.35 | 3.18 | 0.2 | 2 | P |
| VPET 110304 | 6.35 | 3.18 | 0.4 | 2 | P |
牌号s stocked in this family
AT210A.
The family is published for 钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
M, F. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。