INDEXABLE INSERTS
SDMT 铣削刀片
对比 SDMT 个父型号 按材料与应用 之后再选择 a brand.
SDMT Achteck
SDMT 09T308
SDMT 09T308 indexable milling 刀片. 14 available options.
SDMT Achteck
SDMT 09T320
SDMT 09T320 indexable milling 刀片. 12 available options.
SDMT Achteck
SDMT 120408
SDMT 120408 indexable milling 刀片. 17 available options.
SDMT Achteck
SDMT 120420
SDMT 120420 indexable milling 刀片. 1 available option.
SDMT Achteck
SDMT 120425
SDMT 120425 indexable milling 刀片. 2 available options.
SDMT Achteck
SDMT 120430
SDMT 120430 indexable milling 刀片. 1 available option.
No matching 个父型号.
SDMT is a square milling geometry, used on face mills and shoulder cutters. There are 10 sizes in this family and 58 insert variants in stock, covering 钢, 不锈钢, 铸铁, 耐热合金.
Sizes in this family
Every SDMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| SDMT 120408 | 12.7 | 4.76 | 0.8 | 17 | P, M, K, S |
| SDMT 09T308 | 9.53 | 3.97 | 0.8 | 14 | P, M, K, S |
| SDMT 09T320 | 9.52–9.53 | 3.97 | 2 | 12 | P, M, K, S |
| SDMT 09T304 | 9.53 | 3.97 | 0.4 | 4 | P, M, K, S |
| SDMT 120412 | 12.7 | 4.76 | 1.2 | 3 | P, M, K, S |
| SDMT 120425 | 12.7 | 4.76 | 2.5 | 2 | P, M, S |
| SDMT 1205ZTN | — | 5.56 | — | 2 | P, M, K |
| SDMT 1505ZTN | — | 5.56 | — | 2 | P, M, K |
| SDMT 120420 | 12.7 | 4.76 | 2 | 1 | K |
| SDMT 120430 | 12.7 | 4.76 | 3 | 1 | K |
牌号s stocked in this family
AP251K, AP251U, AP403M, AP351U, AC151K, AP351M, AC301K, AC251P, AP351S, HS5120, HS5130, AP403S.
The family is published for 钢, 不锈钢, 铸铁, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
MM4, MR2, MM3, FM. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 面铣
- Chamfer Milling
- 槽铣
- 斜坡铣
- 面铣
- Chamfer milling
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.