INDEXABLE INSERTS
APKT 铣削刀片
对比 APKT 个父型号 按材料与应用 之后再选择 a brand.
3可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
5可选型号查看 options
1可选型号查看 options
No matching 个父型号.
APKT covers 10 insert sizes in a parallelogram milling geometry, typically used on 85° and 90° shoulder cutters. We stock 23 variants across the family from Achteck, HADSTO, published for 钢, 不锈钢, 铸铁, 耐热合金.
Sizes in this family
Every APKT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| APKT 1705 | 10.76 | 5.63 | 0.8 | 5 | P, M, K, S |
| APKT 1003 | 6.66 | 3.8 | 0.8 | 3 | P, M, S |
| APKT 113604PEER | — | 3.6 | 0.4 | 2 | P, M, K |
| APKT 113612PEER | — | 3.6 | 1.2 | 2 | P, M, K |
| APKT 113620PEER | — | 3.6 | 0.6 | 2 | P, M, K |
| APKT 1136PEER | — | 3.6 | 0.8 | 2 | P, M, K |
| APKT 160512PDER | — | 5.2 | 1.2 | 2 | P, M, K |
| APKT 160520PDER | — | 5.2 | 2 | 2 | P, M, K |
| APKT 1605PDER | — | 5.2 | 0.8 | 2 | P, M, K |
| APKT 170516 | 10.74 | 5.63 | 1.6 | 1 | P, M |
牌号s stocked in this family
HS5115, HS5130, AP251U, AP351U, AP251K, AP301U(N), AP403M, AP403S.
The family is published for 钢, 不锈钢, 铸铁, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
FM, DT, IT. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 方肩铣
- 面铣
- 槽铣
- 斜坡铣
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。