INDEXABLE INSERTS
APKT Milling Inserts
Compare APKT parent models by material and application before choosing a brand.
APKT Achteck
APKT 1003
APKT 1003 indexable milling inserts. 3 available options.
APKT HADSTO
APKT 113604PEER
APKT 113604PEER indexable milling inserts. 2 available options.
APKT HADSTO
APKT 113612PEER
APKT 113612PEER indexable milling inserts. 2 available options.
APKT HADSTO
APKT 113620PEER
APKT 113620PEER indexable milling inserts. 2 available options.
APKT HADSTO
APKT 1136PEER
APKT 1136PEER indexable milling inserts. 2 available options.
APKT HADSTO
APKT 160512PDER
APKT 160512PDER indexable milling inserts. 2 available options.
APKT HADSTO
APKT 160520PDER
APKT 160520PDER indexable milling inserts. 2 available options.
APKT HADSTO
APKT 1605PDER
APKT 1605PDER indexable milling inserts. 2 available options.
APKT Achteck
APKT 1705
APKT 1705 indexable milling inserts. 5 available options.
APKT Achteck
APKT 170516
APKT 170516 indexable milling inserts. 1 available option.
No matching parent models.
APKT covers 10 insert sizes in a parallelogram milling geometry, typically used on 85° and 90° shoulder cutters. We stock 23 variants across the family from Achteck, HADSTO, published for Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every APKT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| APKT 1705 | 10.76 | 5.63 | 0.8 | 5 | P, M, K, S |
| APKT 1003 | 6.66 | 3.8 | 0.8 | 3 | P, M, S |
| APKT 113604PEER | — | 3.6 | 0.4 | 2 | P, M, K |
| APKT 113612PEER | — | 3.6 | 1.2 | 2 | P, M, K |
| APKT 113620PEER | — | 3.6 | 0.6 | 2 | P, M, K |
| APKT 1136PEER | — | 3.6 | 0.8 | 2 | P, M, K |
| APKT 160512PDER | — | 5.2 | 1.2 | 2 | P, M, K |
| APKT 160520PDER | — | 5.2 | 2 | 2 | P, M, K |
| APKT 1605PDER | — | 5.2 | 0.8 | 2 | P, M, K |
| APKT 170516 | 10.74 | 5.63 | 1.6 | 1 | P, M |
Grades stocked in this family
HS5115, HS5130, AP251U, AP351U, AP251K, AP301U(N), AP403M, AP403S.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
FM, DT, IT. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Shoulder Milling
- Face Milling
- Slot Milling
- Ramp Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.