INDEXABLE INSERTS
VCMT 车削刀片
对比 VCMT 个父型号 按材料与应用 之后再选择 a brand.
1可选型号查看 options
9可选型号查看 options
5可选型号查看 options
8可选型号查看 options
1可选型号查看 options
15可选型号查看 options
5可选型号查看 options
15可选型号查看 options
5可选型号查看 options
No matching 个父型号.
VCMT is a 35° rhombic shape with four edges, for fine profiling, copying and sharp internal corners. There are 9 sizes in this family and 64 insert variants in stock, covering 钢, 不锈钢, 铸铁, 有色金属, 耐热合金.
Sizes in this family
Every VCMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| VCMT 160404 | 9.53 | 4.76 | 0.4 | 15 | P, M, S |
| VCMT 160408 | 9.53 | 4.76 | 0.8 | 15 | P, M, S |
| VCMT 110304 | 6.35 | 3.18 | 0.4 | 9 | P, M, S |
| VCMT 110308 | 6.35 | 3.18 | 0.8 | 8 | P, M, S |
| VCMT 110304-MV | 6.35 | 3.18 | 0.4 | 5 | P, M, K, N |
| VCMT 160404-MV | 9.53 | 4.76 | 0.4 | 5 | P, M, K, N |
| VCMT 160408-MV | 9.53 | 4.76 | 0.8 | 5 | P, M, K, N |
| VCMT 110302 | 6.35 | 3.18 | 0.2 | 1 | P, M |
| VCMT 160402 | 9.53 | 4.76 | 0.2 | 1 | P, M |
牌号s stocked in this family
AP200U, AC052P, AC100M, AC152P, AC200M, AC252P, AP200M, AP301M, HS6120, HS7125, HS7225, HS8115, HS8125.
The family is published for 钢, 不锈钢, 铸铁, 有色金属, 耐热合金. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
PB2, PC2, MV, PB1. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 中加工
- 精加工
- 粗加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。