INDEXABLE INSERTS
TNGA 车削刀片
对比 TNGA 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
TNGA covers 4 insert sizes in a triangular 60° shape giving six cutting edges — the lowest cost per edge, at the price of a weaker tip. We stock 12 variants across the family from Achteck, published for 铸铁, 有色金属, 淬硬钢.
Sizes in this family
Every TNGA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| TNGA 160404 | 9.53 | 4.76 | 0.4 | 4 | K, N, H |
| TNGA 160408 | 9.53 | 4.76 | 0.8 | 4 | K, N, H |
| TNGA 160412 | 9.53 | 4.76 | 1.2 | 3 | K, H |
| TNGA 160402 | 9.53 | 4.76 | 0.2 | 1 | N |
牌号s stocked in this family
PD20, PB30, PB60, PB90.
The family is published for 铸铁, 有色金属, 淬硬钢. Pick the grade from the group you are cutting — how to read grade names.
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。