INDEXABLE INSERTS
CCET 车削刀片
对比 CCET 个父型号 按材料与应用 之后再选择 a brand.
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
2可选型号查看 options
4可选型号查看 options
8可选型号查看 options
8可选型号查看 options
4可选型号查看 options
8可选型号查看 options
8可选型号查看 options
No matching 个父型号.
CCET is an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. There are 12 sizes in this family and 52 insert variants in stock, covering 钢.
Sizes in this family
Every CCET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| CCET 060202 | 6.35 | 2.38 | 0.2 | 8 | P |
| CCET 060204 | 6.35 | 2.38 | 0.4 | 8 | P |
| CCET 09T302 | 6.35–9.53 | 2.38–3.97 | 0.2 | 8 | P |
| CCET 09T304 | 6.35–9.53 | 2.38–3.97 | 0.4 | 8 | P |
| CCET 060201 | 6.35 | 2.38 | 0.1 | 4 | P |
| CCET 09T301 | 9.53 | 3.97 | 0.1 | 4 | P |
| CCET 030101 | 3.5 | 1.43 | 0.1 | 2 | P |
| CCET 030102 | 3.5 | 1.43 | 0.2 | 2 | P |
| CCET 030104 | 3.5 | 1.43 | 0.4 | 2 | P |
| CCET 040101 | 4.3 | 1.83 | 0.1 | 2 | P |
| CCET 040102 | 4.3 | 1.83 | 0.2 | 2 | P |
| CCET 040104 | 4.3 | 1.83 | 0.4 | 2 | P |
牌号s stocked in this family
AT210A, AT210.
The family is published for 钢. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
F, M. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 精加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。