CCET Turning Inserts

INDEXABLE INSERTS

CCET Turning Inserts

Compare CCET parent models by material and application before choosing a brand.

12 parent models
CCET030101 turning inserts

CCET Achteck

CCET 030101

PFinishing

CCET 030101 indexable turning inserts. 2 available options.

2Available optionsView options
CCET030102 turning inserts

CCET Achteck

CCET 030102

PFinishing

CCET 030102 indexable turning inserts. 2 available options.

2Available optionsView options
CCET030104 turning inserts

CCET Achteck

CCET 030104

PFinishing

CCET 030104 indexable turning inserts. 2 available options.

2Available optionsView options
CCET040101 turning inserts

CCET Achteck

CCET 040101

PFinishing

CCET 040101 indexable turning inserts. 2 available options.

2Available optionsView options
CCET040102 turning inserts

CCET Achteck

CCET 040102

PFinishing

CCET 040102 indexable turning inserts. 2 available options.

2Available optionsView options
CCET040104 turning inserts

CCET Achteck

CCET 040104

PFinishing

CCET 040104 indexable turning inserts. 2 available options.

2Available optionsView options
CCET060201 turning inserts

CCET Achteck

CCET 060201

PFinishing

CCET 060201 indexable turning inserts. 4 available options.

4Available optionsView options
CCET060202 turning inserts

CCET Achteck

CCET 060202

PFinishing

CCET 060202 indexable turning inserts. 8 available options.

8Available optionsView options
CCET060204 turning inserts

CCET Achteck

CCET 060204

PFinishing

CCET 060204 indexable turning inserts. 8 available options.

8Available optionsView options
CCET09T301 turning inserts

CCET Achteck

CCET 09T301

PFinishing

CCET 09T301 indexable turning inserts. 4 available options.

4Available optionsView options
CCET09T302 turning inserts

CCET Achteck

CCET 09T302

PFinishing

CCET 09T302 indexable turning inserts. 8 available options.

8Available optionsView options
CCET09T304 turning inserts

CCET Achteck

CCET 09T304

PFinishing

CCET 09T304 indexable turning inserts. 8 available options.

8Available optionsView options

CCET is an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. There are 12 sizes in this family and 52 insert variants in stock, covering Steel.

Sizes in this family

Every CCET size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.

SizeIC (mm)Thickness (mm)Nose radius (mm)VariantsMaterial groups
CCET 0602026.352.380.28P
CCET 0602046.352.380.48P
CCET 09T3026.35–9.532.38–3.970.28P
CCET 09T3046.35–9.532.38–3.970.48P
CCET 0602016.352.380.14P
CCET 09T3019.533.970.14P
CCET 0301013.51.430.12P
CCET 0301023.51.430.22P
CCET 0301043.51.430.42P
CCET 0401014.31.830.12P
CCET 0401024.31.830.22P
CCET 0401044.31.830.42P

Grades stocked in this family

AT210A, AT210.

The family is published for Steel. Pick the grade from the group you are cutting — how to read grade names.

Chipbreaker geometries

F, M. The chipbreaker defines the feed window — chipbreaker selection guide.

Typical operations

  • Finishing

Which size do you need?

  • Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
  • Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
  • Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.

Related

Supplied by Beijing Henglang Precision Tools Co., Ltd.
Chat on WhatsApp