INDEXABLE INSERTS
WNMA 车削刀片
对比 WNMA 个父型号 按材料与应用 之后再选择 a brand.
No matching 个父型号.
WNMA covers 6 insert sizes in an 80° trigon with six edges, combining the reach of a C-shape with more edges per insert. We stock 16 variants across the family from Achteck, HADSTO, published for 铸铁.
Sizes in this family
Every WNMA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| WNMA 080408 | 12.7 | 4.76 | 0.8 | 4 | K |
| WNMA 080412 | 12.7 | 4.76 | 1.2 | 4 | K |
| WNMA 080404 | 12.7 | 4.76 | 0.4 | 3 | K |
| WNMA 080416 | 12.7 | 4.76 | 1.6 | 3 | K |
| WNMA 060404 | 9.53 | 4.76 | 0.4 | 1 | K |
| WNMA 060408 | 9.53 | 4.76 | 0.8 | 1 | K |
牌号s stocked in this family
HS6120, AC102K, AC202K, AC100K.
The family is published for 铸铁. Pick the grade from the group you are cutting — how to read grade names.
槽型 geometries
KD5. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- 粗加工
- 中加工
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。