INDEXABLE INSERTS
WNMA Turning Inserts
Compare WNMA parent models by material and application before choosing a brand.
WNMA HADSTO, Achteck
WNMA 080404
WNMA 080404 indexable turning inserts. 3 available options.
WNMA HADSTO, Achteck
WNMA 080408
WNMA 080408 indexable turning inserts. 4 available options.
WNMA HADSTO, Achteck
WNMA 080412
WNMA 080412 indexable turning inserts. 4 available options.
WNMA HADSTO, Achteck
WNMA 080416
WNMA 080416 indexable turning inserts. 3 available options.
No matching parent models.
WNMA covers 6 insert sizes in an 80° trigon with six edges, combining the reach of a C-shape with more edges per insert. We stock 16 variants across the family from Achteck, HADSTO, published for Cast iron.
Sizes in this family
Every WNMA size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| WNMA 080408 | 12.7 | 4.76 | 0.8 | 4 | K |
| WNMA 080412 | 12.7 | 4.76 | 1.2 | 4 | K |
| WNMA 080404 | 12.7 | 4.76 | 0.4 | 3 | K |
| WNMA 080416 | 12.7 | 4.76 | 1.6 | 3 | K |
| WNMA 060404 | 9.53 | 4.76 | 0.4 | 1 | K |
| WNMA 060408 | 9.53 | 4.76 | 0.8 | 1 | K |
Grades stocked in this family
HS6120, AC102K, AC202K, AC100K.
The family is published for Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
KD5. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Roughing
- Medium
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.