INDEXABLE INSERTS
CCGW 车削刀片
对比 CCGW 个父型号 按材料与应用 之后再选择 a brand.
5可选型号查看 options
5可选型号查看 options
3可选型号查看 options
5可选型号查看 options
6可选型号查看 options
5可选型号查看 options
4可选型号查看 options
3可选型号查看 options
4可选型号查看 options
2可选型号查看 options
No matching 个父型号.
CCGW covers 10 insert sizes in an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. We stock 42 variants across the family from Achteck, published for 铸铁, 有色金属, 淬硬钢.
Sizes in this family
Every CCGW size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | 厚度 (mm) | 刀尖圆角 (mm) | Variants | 加工材料 groups |
|---|---|---|---|---|---|
| CCGW 09T304 | 9.52–9.53 | 3.97 | 0.4 | 6 | K, N, H |
| CCGW 060202 | 6.35 | 2.38 | 0.2 | 5 | K, N, H |
| CCGW 060204 | 6.35 | 2.38 | 0.4 | 5 | K, N, H |
| CCGW 09T302 | 9.52–9.53 | 3.97 | 0.2 | 5 | K, N, H |
| CCGW 09T308 | 9.52–9.53 | 3.97 | 0.8 | 5 | K, N, H |
| CCGW 120402 | 12.7 | 4.76 | 0.2 | 4 | K, N, H |
| CCGW 120408 | 12.7 | 4.76 | 0.8 | 4 | N, H |
| CCGW 060208 | 6.35 | 2.38 | 0.8 | 3 | N, H |
| CCGW 120404 | 12.7 | 4.76 | 0.4 | 3 | N, H |
| CCGW 120412 | 12.7 | 4.76 | 1.2 | 2 | H |
牌号s stocked in this family
PB30, PB60, PD20, PB90.
The family is published for 铸铁, 有色金属, 淬硬钢. Pick the grade from the group you are cutting — how to read grade names.
Which size do you need?
- 内切圆直径 sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- 刀尖圆角 trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
由北京衡朗精密工具有限公司供货。