INDEXABLE INSERTS
CCGW Turning Inserts
Compare CCGW parent models by material and application before choosing a brand.
5Available optionsView options
5Available optionsView options
3Available optionsView options
5Available optionsView options
6Available optionsView options
5Available optionsView options
4Available optionsView options
3Available optionsView options
4Available optionsView options
2Available optionsView options
No matching parent models.
CCGW covers 10 insert sizes in an 80° rhombic shape with four cutting edges — the default choice for general turning, and the most widely stocked turning geometry in the world. We stock 42 variants across the family from Achteck, published for Cast iron, Non-ferrous, Hardened steel.
Sizes in this family
Every CCGW size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| CCGW 09T304 | 9.52–9.53 | 3.97 | 0.4 | 6 | K, N, H |
| CCGW 060202 | 6.35 | 2.38 | 0.2 | 5 | K, N, H |
| CCGW 060204 | 6.35 | 2.38 | 0.4 | 5 | K, N, H |
| CCGW 09T302 | 9.52–9.53 | 3.97 | 0.2 | 5 | K, N, H |
| CCGW 09T308 | 9.52–9.53 | 3.97 | 0.8 | 5 | K, N, H |
| CCGW 120402 | 12.7 | 4.76 | 0.2 | 4 | K, N, H |
| CCGW 120408 | 12.7 | 4.76 | 0.8 | 4 | N, H |
| CCGW 060208 | 6.35 | 2.38 | 0.8 | 3 | N, H |
| CCGW 120404 | 12.7 | 4.76 | 0.4 | 3 | N, H |
| CCGW 120412 | 12.7 | 4.76 | 1.2 | 2 | H |
Grades stocked in this family
PB30, PB60, PD20, PB90.
The family is published for Cast iron, Non-ferrous, Hardened steel. Pick the grade from the group you are cutting — how to read grade names.
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.