INDEXABLE INSERTS
SEMR Milling Inserts
Compare SEMR parent models by material and application before choosing a brand.
SEMR HADSTO
SEMR 1203AFTN
PMKFace Milling
SEMR 1203AFTN indexable milling inserts. 2 available options.
2Available optionsView options
No matching parent models.
This is our SEMR range: 1 sizes, 2 variants, HADSTO. The geometry is a square milling geometry, used on face mills and shoulder cutters. Applications published for the family cover Steel, Stainless steel, Cast iron.
Sizes in this family
Every SEMR size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| SEMR 1203AFTN | — | 3.18 | — | 2 | P, M, K |
Grades stocked in this family
HS5120, HS5130.
The family is published for Steel, Stainless steel, Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Typical operations
- Face Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.