INDEXABLE INSERTS
WDMT Milling Inserts
Compare WDMT parent models by material and application before choosing a brand.
WDMT HADSTO
WDMT 080520ZTR
WDMT 080520ZTR indexable milling inserts. 2 available options.
No matching parent models.
This is our WDMT range: 1 sizes, 2 variants, HADSTO. The geometry is a dedicated geometry for its intended operation. Applications published for the family cover Steel, Stainless steel, Cast iron.
Sizes in this family
Every WDMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| WDMT 080520ZTR | — | 5.5 | — | 2 | P, M, K |
Grades stocked in this family
HS5120, HS5130.
The family is published for Steel, Stainless steel, Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
GM. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- High Feed Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.