INDEXABLE INSERTS
HNGX Milling Inserts
Compare HNGX parent models by material and application before choosing a brand.
5Available optionsView options
No matching parent models.
This is our HNGX range: 1 sizes, 5 variants, Achteck. The geometry is a hexagonal milling geometry. Applications published for the family cover Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every HNGX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| HNGX 0906 | 16.5 | 6.35 | 1 | 5 | P, M, K, S |
Grades stocked in this family
AC151K, AC251P, AP251K, AP251U, AP403M.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MR6. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.