INDEXABLE INSERTS
SCGT Milling Inserts
Compare SCGT parent models by material and application before choosing a brand.
SCGT Achteck
SCGT 120630
SCGT 120630 indexable milling inserts. 1 available option.
No matching parent models.
This is our SCGT range: 1 sizes, 1 variants, Achteck. The geometry is a square milling geometry, used on face mills and shoulder cutters. Applications published for the family cover Stainless steel, Heat-resistant alloys.
Sizes in this family
Every SCGT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| SCGT 120630 | 12.7 | 6.35 | 3 | 1 | M, S |
Grades stocked in this family
AP351S.
The family is published for Stainless steel, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MR4. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Slot Milling
- Ramp Milling
- Helical Interpolation
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.