INDEXABLE INSERTS
XDMW Milling Inserts
Compare XDMW parent models by material and application before choosing a brand.
XDMW Achteck
XDMW 090408
XDMW 090408 indexable milling inserts. 1 available option.
XDMW Achteck
XDMW 120508
XDMW 120508 indexable milling inserts. 2 available options.
No matching parent models.
XDMW is a dedicated milling geometry. There are 2 sizes in this family and 3 insert variants in stock, covering Steel, Stainless steel, Cast iron.
Sizes in this family
Every XDMW size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| XDMW 120508 | 12.7 | 5.56 | 0.8 | 2 | P, M, K |
| XDMW 090408 | 9.51 | 4.76 | 0.8 | 1 | K |
Grades stocked in this family
AC301K, AP251U.
The family is published for Steel, Stainless steel, Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
HR2. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Slot Milling
- Ramp Milling
- Helical Interpolation
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.