INDEXABLE INSERTS
XOMT Milling Inserts
Compare XOMT parent models by material and application before choosing a brand.
XOMT Achteck
XOMT 09T312
XOMT 09T312 indexable milling inserts. 1 available option.
XOMT Achteck
XOMT 120420
XOMT 120420 indexable milling inserts. 1 available option.
No matching parent models.
XOMT covers 2 insert sizes in a dedicated milling geometry. We stock 2 variants across the family from Achteck, published for Stainless steel, Heat-resistant alloys.
Sizes in this family
Every XOMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| XOMT 09T312 | 9.53 | 3.97 | 1.2 | 1 | M, S |
| XOMT 120420 | 12.7 | 4.82 | 2 | 1 | M, S |
Grades stocked in this family
AP351S.
The family is published for Stainless steel, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MS4. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Slot Milling
- Ramp Milling
- Helical Interpolation
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.