INDEXABLE INSERTS
APHT Milling Inserts
Compare APHT parent models by material and application before choosing a brand.
APHT Achteck
APHT 1604
NShoulder Milling, Face Milling, Slot Milling
APHT 1604 indexable milling inserts. 1 available option.
1Available optionsView options
No matching parent models.
APHT is a parallelogram milling geometry, typically used on 85° and 90° shoulder cutters. There are 1 sizes in this family and 1 insert variants in stock, covering Non-ferrous.
Sizes in this family
Every APHT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| APHT 1604 | 9.37 | 5.17 | 0.8 | 1 | N |
Grades stocked in this family
AW100K.
The family is published for Non-ferrous. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
FM2. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Shoulder Milling
- Face Milling
- Slot Milling
- Ramp Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.