INDEXABLE INSERTS
HNMX Milling Inserts
Compare HNMX parent models by material and application before choosing a brand.
HNMX HADSTO
HNMX 0906ANSN
HNMX 0906ANSN indexable milling inserts. 2 available options.
No matching parent models.
HNMX is a hexagonal milling geometry. There are 3 sizes in this family and 12 insert variants in stock, covering Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every HNMX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| HNMX 0906 | 16.5 | 6.35 | 1 | 5 | P, M, K, S |
| HNMX 090612 | 16.5 | 6.35 | 1.2 | 5 | P, M, K, S |
| HNMX 0906ANSN | — | — | 1.2 | 2 | P, M, K |
Grades stocked in this family
AC151K, AC251P, AP251K, AP251U, AP403M, HS5120, HS5130.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MM4, M. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.