INDEXABLE INSERTS
LNHQ Milling Inserts
Compare LNHQ parent models by material and application before choosing a brand.
2Available optionsView options
2Available optionsView options
No matching parent models.
LNHQ covers 2 insert sizes in a rectangular milling geometry used on shoulder and copy mills. We stock 4 variants across the family from Achteck, published for Cast iron.
Sizes in this family
Every LNHQ size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| LNHQ 120408 | — | 9.4 | 0.8 | 2 | K |
| LNHQ 150416 | — | 9.25 | 1.6 | 2 | K |
Grades stocked in this family
AP153H, AP151H.
The family is published for Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
W. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.