INDEXABLE INSERTS
LNMX Milling Inserts
Compare LNMX parent models by material and application before choosing a brand.
LNMX Achteck
LNMX 060410
LNMX 060410 indexable milling inserts. 9 available options.
LNMX Achteck
LNMX 100512
LNMX 100512 indexable milling inserts. 13 available options.
No matching parent models.
LNMX is a rectangular milling geometry used on shoulder and copy mills. There are 2 sizes in this family and 22 insert variants in stock, covering Steel, Stainless steel, Cast iron, Heat-resistant alloys, Hardened steel.
Sizes in this family
Every LNMX size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| LNMX 100512 | — | 4.55 | 1.2 | 13 | P, M, S, H |
| LNMX 060410 | — | 3.6 | 1 | 9 | P, M, K, S, H |
Grades stocked in this family
AP151H, AP251U, AP351U, AP403M, AC451S, AP403S, AP153H, AP351M, AC301K.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys, Hardened steel. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MM4, MM3, MM4N. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Slot Milling
- Ramp Milling
- Helical Interpolation
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.