INDEXABLE INSERTS
ODMT Milling Inserts
Compare ODMT parent models by material and application before choosing a brand.
ODMT Achteck
ODMT 060508
ODMT 060508 indexable milling inserts. 5 available options.
ODMT Achteck
ODMT 060512
ODMT 060512 indexable milling inserts. 2 available options.
No matching parent models.
ODMT covers 2 insert sizes in an octagonal milling geometry giving eight edges per insert. We stock 7 variants across the family from Achteck, published for Steel, Stainless steel, Cast iron, Heat-resistant alloys.
Sizes in this family
Every ODMT size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| ODMT 060508 | 16 | 5.56 | 0.8 | 5 | P, M, K, S |
| ODMT 060512 | 16 | 5.56 | 1.2 | 2 | P, M, S |
Grades stocked in this family
AP251U, AC251P, AC301K, AP251K, AP351U, AP403S.
The family is published for Steel, Stainless steel, Cast iron, Heat-resistant alloys. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
MM3. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Ramp Milling
- Helical Interpolation
- Pocket Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.