INDEXABLE INSERTS
ODMW Milling Inserts
Compare ODMW parent models by material and application before choosing a brand.
ODMW Achteck
ODMW 060512
KFace Milling, Ramp Milling, Helical Interpolation
ODMW 060512 indexable milling inserts. 2 available options.
2Available optionsView options
No matching parent models.
ODMW covers 1 insert sizes in an octagonal milling geometry giving eight edges per insert. We stock 2 variants across the family from Achteck, published for Cast iron.
Sizes in this family
Every ODMW size we carry, with the measured geometry and how many variants are in stock. Open a size for the full cutting data and grade list.
| Size | IC (mm) | Thickness (mm) | Nose radius (mm) | Variants | Material groups |
|---|---|---|---|---|---|
| ODMW 060512 | 16 | 5.56 | 1.2 | 2 | K |
Grades stocked in this family
AC301K, AP251K.
The family is published for Cast iron. Pick the grade from the group you are cutting — how to read grade names.
Chipbreaker geometries
HR2. The chipbreaker defines the feed window — chipbreaker selection guide.
Typical operations
- Face Milling
- Ramp Milling
- Helical Interpolation
- Pocket Milling
Which size do you need?
- Inscribed circle sets the maximum depth of cut. As a rule keep ap under about two thirds of the IC.
- Nose radius trades finish against strength. A larger radius gives better surface finish at the same feed and a stronger edge, but raises cutting force and cannot produce tight internal corners.
- Check the holder. The holder designation must carry the same shape letter and the same size digit as the insert.
Related
Supplied by Beijing Henglang Precision Tools Co., Ltd.